Language Selection: Chinese | English
CMS English

HOTLINE

0086-755-26475332

  • HOME
  • ABOUT
    Introduction Factory Company Culture Company Business Enviroenment
  • Product
    banana Pi STEAM education Network communication Asterisk Card POE product 3G/wirless GPS/RFID
  • News
    Media reprint Industry News Company News
  • Support
    Service Cnter FAQ Update Center
  • Recruit
    HR Information HR Policy Jobs
  • BUY
  • Contact
  • FeedBack
Product
  • banana Pi
    • Single board computer
    • Smart router board
    • IoT&Industrial control
  • STEAM education
  • Network communicat..
  • Asterisk Card
    • GSM asterisk card
    • PCI analog asterisk card
    • PCI-E analog asterisk card
    • asterisk E1 card
  • POE product
    • POE switch
    • POE AF Midspan
    • POE AT Midspan
    • POE Module
  • 3G/wirless
    • Inwall AP
    • Inwall USB socket
    • 3G/WIF IP camera
  • GPS/RFID
What's Hot
Banana Pi with Rockchip RV1109 and RV1126 AI Camera design
4G/5G intelligent converged communication gateway MNF-620 solution supports 4G multi-card aggregation
Banana Pi BPI-TriodeCar designed for education on entry-level engineering
Banana PI BPI Q-Car Robort Kit for STEAM ecucation,support micro:bit and BPI:bit
BPI-AI(Web:AI for Webduino) design with K210 RISC-V chip design
Banana Pi BPI-M4 with Realtek RTD1395 chp design
Banana Pi BPI-M5 with Amlogic S905x3 chip design
Banana Pi BPI-M2 Pro with Amlogic S905x3 chip design
Banana Pi BPI-F2S with Sunpuls sp7021 and Xilinx Artix-7 FPGA
Banana Pi BPI-F2P Industrial control board with Sunplus sp7021 design
Banana Pi BPI-M2S with Amlogic A311D chip design
Banana Pi BPI-R2 Pro smart router board with Rockchip RK3568 chip design
Contact Us

SINOVOIP CO., LIMITED

Address: 7/F, Comprehensive Building of Zhongxing Industry City, Chuangye Road, Nanshan District, Shenzhen

Phone: 0086-755-26475332          

E-mail:

judyhuang@banana-pi.com 

lionwang@banana-pi.com 






Search
Your Position:Home > Product > Asterisk Card > asterisk E1 card

SinoV-TE420P 4 E1 pci asterisk card

Update:2014/6/10 10:03:20      View:5345
  • Type:   SinoV-TE420P
  • Description:

    The SinoV-TE420P is a with 4 ports, selectable E1 (32-channel) or T1 (24-channel) card that supports all the functionality of the Digium quad T1/E1 card. This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router.

Introduction

The SinoV-TE420P is a with 4 ports, selectable E1 (32-channel) or T1 (24-channel) card that supports all the functionality of the Digium quad T1/E1 card. This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router.
By utilizing our TDMoE technology, an exclusive Digium process, one can easily connect multiple PCs equipped with the card and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple cards to each individual PC. Add addition cards as you need them for your expanding applications.
The card supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.
The card is a compact and powerful interface supporting voice and data transmission over T1, E1, and Primary Rate ISDN (PRI) connections. A low profile, half-length PCI form factor allows this device to fit within a 2U rackmount case or equivalent chassis, offer excellent density for call center, service provider, and other space-sensitive applications.

Of course, the asterisk card TE420P is fully supported by Digium open source Asterisk PBX software. Used in conjunction with Asterisk, the card offers the power to create a seamless network, interconnecting PSTN with the emerging Voice-over IP technologies. The card can be used to deliver a wide range of PBX and IVR services to the network or handset including Three-Way Calling, Call Conferencing,Voicemail ,and VoIP Gateways. 

Interfaces:
- 4X E1/T1 interfaces ( E1/T1 selectable) 
- PCI interface
Features:

One PRI port 30 channels 
Hardware DTMF detection
Conference Bridge
PCM bus connectors (PCM30, PCM64, PCM128)
4 dual-color LEDs (layer 1 state indicators)
Active channel switching (across multiple cards over the external PCM bus)
PRI ISDN protocol stack
Suitable for 3.3 volts and 5.0 volts 32 bit PCI 2.2 slots

Applications:
ISDN PRI PBX
ISDN least cost router
Voice over IP PRI gateways
VoIP integration of ISDN equipment
PBX to PBX trunking
IVR
Data Modes:
Cisco HDLC
HDLC
PPP
Multilink PPP
Frame Relay
Voice Modes:
-EuroISDN
-AT&R 4ESS
-Lucent 5E
-National ISDN2

More Products
SinoV-TE820E 8E1 PCI-E Asterisk E1 card
SinoV-TE430E 4 E1 pci-e asterisk card 2U class
SinoV-TE430P 4 E1 asterisk card 2U class
SinoV-TE230P 2 E1/T1 asterisk card 2U calss
SinoV-TE110E 1 E1 asterisk card
SinoV-TE220P 2 E1 digital E1 asterisk card
SinoV-TE420E Asterisk E1 card
SinoV-TE220E 2 E1 digital PCI-E E1 asterisk card
HOME | ABOUT | JOIN US | SITEMAP
Sinovoip Co.,Limited. 2011 All rights reserved 备案号:粤ICP备12059315号  
Jolin
Edison
Eason
Judy
OEM&ODM